eBLOC-Z
General information
| DALI Product ID | 9853 |
| Product Name | eBLOC-Z |
| Brand Name | LUG |
| Status | Certified: DALI-2, D4i |
| Product Part Number | 770031.001 |
| GTIN | 5900530402686 |
| Bus unit configuration | - |
Testing
| Test conditions | 24VDC, 25*C |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.5.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 0.1 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 40 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 55 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
Product reference product description
eBLOC-Z luminaire controller is dedicated for remote light control. The controller is equipped with DALI-2/D4i interface which is used to control the LED driver in the luminaire. In addition to that, it can communicate with other luminaire components like thermistors or motion detectors. eBLOC-Z controller communicates with the central control system and thanks to that the system operator can remotely turn on or turn off the luminaire or adjust its luminous flux. They can also change the dimming profiles of the luminaire. Data collected by eBLOC-Z are transferred to the cell phone network and later to the management system either via a router or directly. In case the radio link is broken, the collected data is buffered for several dozen hours. All data is transferred when the communication is restored.
Description
A device mounted in the socket of an LED luminaire, used for wireless control of turning it on, off, and dimming. BASIC FEATURES: Radio communication via Thread 2.4 GHz radio mesh network. Built-in antenna, 4-pin Zhaga connector, DALI-2/D4i interface with integrated bus supply, Binary Sensor, Input Built-in dusk and temperature sensors. Real time clock with power supply backup Dedicated for BIOTcloud light management system. Lifetime up to 100,000 hours. 5-year warranty. Waring. If the integrated Bus Power Supply of 55 mA is enabled, the maximum bus power supply current provided by other components in the luminaire shall be at most 195 mA.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
| 351 | 1 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.