DALI Product ID | 9446 |
Product Name | DALI-2 Rotary Controller Plus |
Brand Name | JUNG |
Status | Certified: DALI-2 |
Product Part Number | 1745DSTE |
GTIN | 4011377322646 |
Bus unit configuration | - |
Test conditions | Tambient = 23°C This is a rebrand of device ID 8733 |
Test type | Full |
Family reference product ID | - |
DALI test sequence software version | 2.5.0.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 4 |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | 1.0 |
Firmware version | 1.0 |
-
The DALI-2 rotary controller plus is a DALI 2 multi master control device. It is used to adjust the brightness of luminaires with a DALI-2 interface and to set the colour temperature for DALI control gears of device type 8 (Tunable White). In normal operation mode as DALI-2 Multi Master Application Controller the function always applies to all connected devices (broadcast). The minimum brightness, the switch-on brightness and the colour temperature limits can be saved." With individual DALI-2 Parametrisation it is possible to configure the device for DALI-Group Control (DALI-Groups 1-16). Configured as an DALI-2 Input Device (in this case the DALI-2 Application controller is disabled) it is possible to connect the product to a Building-Automation Gateway (e.g. KNX DALI-2 Gateway) for indirect control of DALI Control-Gears or devices as part of the connected Building Automation System.
101 | 2.0 |
103 | 2.0 |
301 | 2.0 |
302 | 2.0 |