DALI Drehdimmeinsatz Unterputz mit integriertem Netzteil (DALI Rotary Controller Flush mounted with BPS)
General information
| DALI Product ID | 9437 |
| Product Name | DALI Drehdimmeinsatz Unterputz mit integriertem Netzteil (DALI Rotary Controller Flush mounted with BPS) |
| Brand Name | GIRA |
| Status | Certified: DALI-2 |
| Product Part Number | 2027 00 |
| GTIN | 4010337129608 |
| Bus unit configuration | - |
Testing
| Test conditions | Tambient = 23°C V = 230VAC / 50 Hz This product consists of a bus power supply and a bus-powered control device in the same enclosure. The control device is always powered from the bus, not from the external supply. If the external supply is not connected, the integrated bus power supply simply does not provide current to the bus, requiring a bus power supply to be connected elsewhere in the system. This is a rebrand of device ID 8646 |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.5.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 4 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 52 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 61 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
Description
The DALI-2 rotary controller with integrated bus power supply is a DALI-2 multi master control device and supplies the control current for up to 26 DALI control gears. It is used to adjust the brightness of luminaires with a DALI-2 interface and to set the colour temperature for DALI control gears of device type 8 (Tunable White). n normal operation mode as DALI-2 MultiMaster Application Controller the function always applies to all connected devices (broadcast). The minimum brightness, the switch-on brightness and the colour temperature limits can be saved." With individual DALI-2 Parametrisation it is possible to configure the device for DALI-Group Control (DALI-Groups 1-16). Up to four devices could be worked in parallel to control the control gears from different locations. Configured as a DALI-2 Input Device (in this case the DALI-2 Application controller is disabled) it is possible to connect the product to a Building-Automation Gateway (e.g. KNX DALI-2 Gateway) for indirect control of DALI Control-Gears or devices as part of the connected Building Automation System.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
| 301 | 2.0 |
| 302 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.