DALI Drehdimmeinsatz Unterputz (DALI Rotary Controller Flush-mounted)
General information
| DALI Product ID | 9436 |
| Product Name | DALI Drehdimmeinsatz Unterputz (DALI Rotary Controller Flush-mounted) |
| Brand Name | GIRA |
| Status | Certified: DALI-2 |
| Product Part Number | 2026 00 |
| GTIN | 4010337129592 |
| Bus unit configuration | - |
Testing
| Test conditions | Tambient = 23°C V = 230VAC / 50 Hz This is a rebrand of device ID 8733 |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.5.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 4 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
Description
The DALI-2 rotary controller is a DALI-2 multimaster control device. It is used to adjust the brightness of luminaires with a DALI-2 interface and to set the colour temperature for DALI control gears of device type 8 (Tunable White).In normal operation mode as DALI-2 Multi-Master Application Controller the function always applies to all connected devices(broadcast). The minimum brightness, the switch-on brightness and the colour temperature limits can be saved. With individual DALI-2 Parametrisation it is possible to configure the device for DALI-GroupControl (DALI Groups 1-16). Configured as a DALI-2 Input Device (in this case the DALI-2 Application controller is disabled) it is possible to connect the product to a Building-Automation Gateway (e.g. KNX DALI-2 Gateway) for indirect control of DALI Control-Gears or devices as part of the connected Building Automation System.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
| 301 | 2.0 |
| 302 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.