Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

NFC Programmable Round 10W CC DALI Driver SRPY-2305N-10CC100-500

General information

DALI Product ID8162
Product NameNFC Programmable Round 10W CC DALI Driver SRPY-2305N-10CC100-500
Brand NameSunricher
StatusCertified: DALI-2
Product Part NumberSRPY-2305N-10CC100-500
GTIN6971542123318
Bus unit configuration-

Testing

Test conditions- 10W LED load applied by manufacturer - 230V 50Hz - Ambient temperature 25℃ - ProbitLab2 - Partial testings performed are IEC62386-102 2.1, IEC62386-102 5.1, IEC62386-102 6.20, IEC62386-102 6.21, IEC62386-102 8.1
Test typePartial
Family reference product ID8150
DALI test sequence software version2.4.0.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

2
Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

0
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

0

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version2.0
Firmware version5.0

Description

Round 10W DALI driver, 220-240VAC input, 1 channel constant current output, output voltage 3-42VDC, output current 100-500mA programmable via NFC with 0.1mA per gear, tested at both the lowest output and the highest output current. DALI parameters programmable via NFC. Supports part 251, 252, 253.(Full tests on product ID 8150, 8150 is with 36W rated power, 220-240VAC input, 1 channel constant current output, output voltage 10-42VDC, output current 600-1200mA programmable via NFC with 0.1mA per gear, label difference)

DALI parts and versions

1012.0
1022.0
2071.0
2512.0
2522.0
2532.0

Product properties

LED drivers, ballasts, ECGs, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available