LLC7815/00 CT NODE NEMA5 ACHV P US4VF LG
General information
| DALI Product ID | 8061 |
| Product Name | LLC7815/00 CT NODE NEMA5 ACHV P US4VF LG |
| Brand Name | Philips |
| Status | Certified: DALI-2, D4i |
| Product Part Number | 9137010664 |
| GTIN | 046677585747 |
| Bus unit configuration | - |
Testing
| Test conditions | 380V, 50Hz, Ambient Temperature 25degC, ProbitLab2. Product is a NEMA 5 pin connector based Multi-master Control device with active integrated DALI bus power supply. DALI Bus power supply is not switchable. Product has undergone full round of testing. All 101,103,351 tests executed. |
| Test type | Partial |
| Family reference product ID | 4338 |
| DALI test sequence software version | 2.4.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 0 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 10 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 30 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 66.51 |
| Firmware version | 2.239 |
Product reference product description
This product has two family products: 1. LLC7811/00 CT NODE NEMA5 ACLV PC US4VF BK. 2. LLC7814/00 CT NODE NEMA5 ACLV AS US4VF LG.
Description
The CT node is a luminaire-based control device that connects your street light to the Interact City lighting management system. The CT node uses cellular communication to remotely manage, monitor and control each street light individually. The CT node controls the street light by switching the mains supply and provides dimming by means of a digital (DALI) or analog (0-10V) interface. This node input voltage range is 347V - 480V, change in power board related hardware, DALI Circuit is same as Main variant. NOTE: Bus power supply enabled by default, so only for use with a luminaire with up to 3 D4i drivers.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
| 351 | 1.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.