KNX DALI-2 Gateway 2 channels
General information
| DALI Product ID | 7421 |
| Product Name | KNX DALI-2 Gateway 2 channels |
| Brand Name | Hager |
| Status | Certified: DALI-2 |
| Product Part Number | TYFS672D |
| GTIN | 3250610050231 |
| Bus unit configuration | - |
Testing
| Test conditions | T ambient = 23°C V = 110VAC, 230VAC, 240VAC / 50 Hz. Rebrand of 6812. |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.3.3.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 128 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
Description
The Hager KNX DALI-Gateway secure is a multi-master application controller for controlling electronic ballasts with two DALI-Interface via the KNX installation bus (with / without KNX Data Secure communication). It supports ballasts according to EN 62386-102 ed1 (DALI-1), devices according to EN 62386-102 ed2 (DALI-2). Special DALI ballasts for colour control (RGB(W)/TW) according to EN 62386-209 will also be supported.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.