Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

NFC Programmable Long Metal 80W DALI D4i DT8 TW CC Driver SRPL-2309iN-80CCT1000-2000

General information

DALI Product ID7067
Product NameNFC Programmable Long Metal 80W DALI D4i DT8 TW CC Driver SRPL-2309iN-80CCT1000-2000
Brand NameSunricher
StatusCertified: DALI-2, D4i
Product Part NumberSRPL-2309iN-80CCT1000-2000
GTIN6971542123073
Bus unit configuration-

Testing

Test conditions- 2 x 40W LED load applied by manufacturer - 230V 50Hz - Ambient temperature 25℃ - ProbitLab2 - Partial testings performed are IEC62386-102 2.1, IEC62386-102 5.1, IEC62386-102 6.20, IEC62386-102 6.21, IEC62386-102 8.1
Test typePartial
Family reference product ID7063
DALI test sequence software version2.3.3.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

2
Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

54
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

62

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version2.0
Firmware version5.0

Description

Long metal 80W DALI driver, DALI DT8, 200-240VAC input, 2 control channels, constant current, output voltage 10-54VDC, output current 1000-2000mA NFC programmable 0.1mA per gear, tested at both minimum output and maximum output. DALI parameters programmable via NFC. Supports part 250, 251, 252, 253. (Full tests on product ID 7063, 7063 is with 30W rated power, 200-240VAC input, 2 control channels, constant current, output voltage 10-54VDC, output current 250-850mA NFC programmable 0.1mA per gear, label difference)

DALI parts and versions

1012.0
1022.0
2071
2092.0
2502.0
2512.0
2522.0
2532.0

Product properties

LED drivers, ballasts, ECGs, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available