




DALI Product ID | 6762 |
Product Name | KNX/DALI Gateway TW |
Brand Name | Eelectron |
Status | Certified: DALI-2 |
Product Part Number | IC00P02DAL |
GTIN | 8054144521220 |
Bus unit configuration | - |
https://www.eelectron.com/en/prodotto/knxdali-gateway-tunable-white/
Test conditions | 230VAC, 50Hz |
Test type | Full |
Family reference product ID | - |
DALI test sequence software version | 2.3.3.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 128 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | 73138532 |
Firmware version | 45065953 |
KNX-DALI Gateway
The DALI Gateway forms the interface between a KNX installation and a digital DALI (Digital Addressable Lighting Interface) lighting system.The KNX/DALI Interface GATEWAY Tunable White allows the switching and dimming of a maximum of 64 lights with a DALI operating device (e.g. electronic ballast).Up to 6 different addressing types of the DALI Gateway allow group-orientated and individually- address control of DALI lights via KNX telegrams. This allows the integration of room-specific light control, for example, of open-plan offices, multipurpose spaces, production facilities, training and presentation rooms or showcases into the higher-level KNX building management. Depending on the configuration, up to 32 independent DALI groups are available for group addressing.For alternative control, these can be supplemented with 64 individually-addressable DALI device channels, as necessary.Optionally, master control of all connected DALI components is possible (broadcast).This means that there is no need to commission DALI, meaning that lighting systems with few functions can be started up quickly and easily (simplified configuration without DALI commissioning).The DALI Gateway is supplied completely via the mains voltage connection and makes the DALI system voltage available.The device is designed for mounting on DIN rails.Colour temperature control (DALI Device Type 8)The KNX DALI Gateway supports the control of DALI operating devices of the device type “Colour Control” (DALI Device Type 8) in the specific version “Tunable White (TW)”. This makes it possible to control the colour temperature of a lamp by means of suitable DALI operating devices and luminaires. The Gateway allows the colour temperature control via relative or absolute dimming as well as via scenes and effects. The colour temperature control is largely independent of the brightness control and luminaire used.
101 | 2.0 |
103 | 2.0 |