Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

RAPIX DALI-2 DIN Blind/Shutter Relay

General information

DALI Product ID6546
Product NameRAPIX DALI-2 DIN Blind/Shutter Relay
Brand NameOzuno
StatusCertified: DALI-2
Product Part NumberDGOZ-DINBSR-01
GTIN9355691000602
Bus unit configuration-

External link to product

https://ozuno.com/product/dali2-blind-and-shutter-relay

Testing

Test conditions240V, 50Hz supply. Ambient temperature 25C. Tested with A-OK tubular motor, 12V dc, 950 mA, 11 W.
Test typeFull
Family reference product ID-
DALI test sequence software version2.3.3.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

4.0
Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

0
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

0

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version1.0
Firmware version2.0

Description

This DIN mounted relay is suitable for the control of ac and dc motors commonly used for curtains, blinds, shutters and tilting shading systems. This relay product can be used in any DALI system. Operations include manual control – UP/OPEN, DOWN/CLOSE and STOP. Commissioning options allow proportional control, for example setting the amount open or tilt angle. Hardware interlocks ensure that only one of the outputs UP/OPEN or DOWN/CLOSE can be active at any time. Cable termination uses high quality rising cage clamp style screw terminals, and is suitable for terminating 1.5 mm2 or 2.5 mm2 cables (ac supply cables, switched load cables and DALI Line cables). This product needs no external power supply – it is powered from the DALI line.

DALI parts and versions

1012.0
1022.0
2082.0

Product properties

LED drivers, ballasts, ECGs, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available