LLC7856 CT NODE ZHAGA DC MS EU4VF LG
General information
| DALI Product ID | 4601 |
| Product Name | LLC7856 CT NODE ZHAGA DC MS EU4VF LG |
| Brand Name | Philips |
| Status | Certified: DALI-2, D4i |
| Product Part Number | 913701059403 |
| GTIN | 8719514417298 |
| Bus unit configuration | - |
Testing
| Test conditions | 24V DC, Ambient Temperature 25degC, ProbitLab2. The product is a Multi-master application controller, Type A. Product has undergone additional partial test execution and the main product is fully tested. Limited tests executed : 103 6.1. |
| Test type | Partial |
| Family reference product ID | 4580 |
| DALI test sequence software version | 2.4.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 2 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 65.48, 68.50, 67.49, 65.48, 67.50 |
| Firmware version | 2.197, 2.231, 2.244, 2.247. 2.250, 2.254, 3.12 |
Description
The CT node is a luminaire-based control device that connects your street light to the CityTouch and Interact City lighting management system. The CT node uses cellular communication to remotely manage, monitor, and control each street light individually. The CT node controls the street light by switching the mains supply and provides dimming using a digital (DALI) interface. The luminaire shall contain a smart (D4i/SR) LED driver for powering the CT node and energy reporting. Main Product: LLC7852 CT NODE ZHAGA DC EU4VF LG. ( Product ID: 4580). Currently submitted product is a Family Product with following differences: 1. Factory default light behavior is based on mains switch with light grey housing.2. Different 12NC and GTIN.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
| 351 | 1 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.