RAPIX DALI-2 USB Interface
General information
| DALI Product ID | 4453 |
| Product Name | RAPIX DALI-2 USB Interface |
| Brand Name | Ozuno |
| Status | Certified: DALI-2 |
| Product Part Number | DGLMIFU01 |
| GTIN | 9355691000435 |
| Bus unit configuration | - |
External link to product
https://ozuno.com/dali-products/rapix-dali-usb-interface-device/
Testing
| Test conditions | 24 C. Bus-powered only. |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.2.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 8 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 2.0 |
| Firmware version | 3.0 |
Description
The RAPIX DALI-2 USB Interface enables an installer to use the free RAPIX Addressing software for fast and easy programming and commissioning of DALI devices. Using RAPIX Addressing, this can be carried out from a PC or via a Wi-Fi connected smart phone / tablet. Using the buttons, the device also allows a quick and easy method to test basic communication of a DALI line without connecting to a PC.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.