




DALI Product ID | 4448 |
Product Name | gesis KNX FLEX-DA64 |
Brand Name | Wieland Electric GmbH |
Status | Certified: DALI-2 |
Product Part Number | 83.020.0643.0 |
GTIN | 4049088619465 |
Bus unit configuration | - |
https://eshop.wieland-electric.com/product/83.020.0643.0
Test conditions | ProbitLab2 DALI Tester V4.12, ProbitBench V4.3.1.0, Hewlett Packard 34401A Multimeter, Agilent DSOX2004A Oszilloscope |
Test type | Full |
Family reference product ID | - |
DALI test sequence software version | 2.3.1.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 128 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | A |
Firmware version | 0.3.1 |
System gesis® FLEX - The 1-phase supplied KNX DALI Gateway with flat surface mounted housing which can be fitted on DIN rails for decentralized installation is able to control 64 DALI-2 electronic control gears in 16 groups and singl ECG control as well. It is DALI-2 single master certified, supports all common DALI device types and thus enables e.g. RGBW, tunable white and complex color control via device type 8. The comissioning is done with the ETS from version 5. Errors and status messages as well as the 16 DALI groups can be retrieved at the module. The 5-pole output includes DALI +/-, L, N and PE. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.
101 | 2.0 |
103 | 2.0 |