DaliControl e64 Pro
General information
| DALI Product ID | 3659 |
| Product Name | DaliControl e64 Pro |
| Brand Name | IPAS |
| Status | Certified: DALI-2 |
| Product Part Number | 4101-145-02 |
| GTIN | 4251827500044 |
| Bus unit configuration | - |
Testing
| Test conditions | ProbitLab2 DALI Tester, ProbitBench V4.2.7.0, Hewlett Packard 34401A Multimeter, Agilent DSOX2004A Oszilloscope |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.1.1.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 160 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
Product reference product description
KNX DALI Gateway
Description
The IPAS DALI Gateway DaliControl e64 Pro is a multi-master application controller for controlling electronic ballasts with DALI interface via the KNX installation bus. It supports ballasts according to EN 62386-102 ed1 (DALI1), devices according to EN 62386-102 ed2 (DALI2), as well as DALI2 motion sensors and light sensors according to EN 62386-303 and EN 62386-304.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.