Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

SOLOdrive 160/S

General information

DALI Product ID354
Product NameSOLOdrive 160/S
Brand NameeldoLED
StatusCertified: DALI-2
Product Part Number801-00584
GTIN8719325195309
Bus unit configuration-

External link to product

https://www.eldoled.com/led-drivers/solodrive/10-watt/ac-160s/

Testing

Test conditions230V, 50Hz, Ambient temperature 25, 10W LED load. Additional power cycle, dimming tests and the tests affecting minimum level were done due to a difference in transformer and physical minimum level.
Test typePartial
Family reference product ID112
DALI test sequence software version2.0.6.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

0
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

0

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version3.0
Firmware version5.12, 5.24

Description

SOLOdrive AC, 10W, DALI, constant current, 1x 55V output, side feed, metal square. Additional power cycle, dimming tests and the tests affecting minimum level were done and a full test was done on the ECOdrive 260/S (ID= 112).

DALI parts and versions

1012.0
1022.0
2071

Product properties

LED drivers, ballasts, ECGs, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available