Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

SOLOdrive 240/M

General information

DALI Product ID351
Product NameSOLOdrive 240/M
Brand NameeldoLED
StatusCertified: DALI-2
Product Part Number801-00691
GTIN8719325195163
Bus unit configuration-

External link to product

https://www.eldoled.com/led-drivers/solodrive/20-watt/ac-240m/

Testing

Test conditions230V, 50Hz, Ambient temperature 25, 18W LED load. Additional dimming tests and the tests affecting minimum level were done on the SOLOdrive 240/A and the full test was done on the ECOdrive 240/A.
Test typePartial
Family reference product ID347
DALI test sequence software version2.0.6.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

0
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

0

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version4.0
Firmware version5.12, 5.24

Description

SOLOdrive, 20W, DALI, 1 control channel, constant current, single output, side feed, long plastic. Partial test, fully tested on ECOdrive 240/A (Product ID 347). Features 0.1% minimum dim level versus 1.0% of the ECOdrive.

DALI parts and versions

1012.0
1022.0
2071

Product properties

LED drivers, ballasts, ECGs, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available