Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

KNX DALI-Gateway Basic REG-K/1/16/64

General information

DALI Product ID3254
Product NameKNX DALI-Gateway Basic REG-K/1/16/64
Brand NameSchneider Electric
StatusCertified: DALI-2
Product Part NumberMTN6725-0003
GTIN3606489484040
Bus unit configuration-

External link to product

https://www.se.com/ww/en/product/MTN6725-0003/knx-dali-gateway-basic-reg-k-1-16-64/?range=1424-knx

Testing

Test conditionsProbitLab2 DALI Tester, ProbitBench V4.2.7.0, Hewlett Packard 34401A Multimeter, Agilent DSOX2004A Oszilloscope
Test typeFull
Family reference product ID-
DALI test sequence software version2.1.1.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

128
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

250

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version0B
Firmware version0.2.6

Product reference product description

KNX DALI gateway

Description

The KNX DALI Gateway connects the KNX bus to 1 DALI output. The gateway is a category I DALI control device with an integrated DALI power supply for the ECGs. The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2. It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc. It supports the switching and dimming of up to 64 ECGs in 16 groups and the control of up to 16 scenes.

DALI parts and versions

1012.0
1032.0

Product properties

Sensors, switches, push-buttons, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available