DALI Multi-Master Module
General information
| DALI Product ID | 2036 |
| Product Name | DALI Multi-Master Module |
| Brand Name | WAGO GmbH & Co. KG |
| Status | Certified: DALI-2 |
| Product Part Number | 753-647 |
| GTIN | 4050821475712 |
| Bus unit configuration | - |
Testing
| Test conditions | Tested with WAGO 753-620, 753-620/700-000, 787-1007 and 787-2857 |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.5.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 200 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 3.0, 4.0 |
| Firmware version | 20.0, 21.0, 23.0, 24.0, 26.0 |
Product reference product description
Description
The DALI Multi-Master Module is used to connect a DALI network (DALI Line) to a WAGO fieldbus node with PLCs and WAGO 750/753 Series I/O modules. Integrated DALI bus power supply can be switched off. Test & DALI-2 certification currently applies for the case with the integrated bus power supply enabled.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.